Danuser SM40 Hammer | Universal Skid | Grapple | Tilt | Loaded
Unit Includes
96" Hoses With FF Couplers
Grapple
Tilt
Factory Installed Additional Weight Kit
Danuser Hammer
Model SM40 has a 40” drop hammer design with up to 35 strokes per minute. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. Tilt option allows up to 20° in each direction. The hammer weight is 300 lbs. from the factory. Additional weight can be added for a total of 500 lbs. The unit also has an integrated post puller to be used with log chain.
NOTE: If post/pipe diameter is 5" or smaller and you have a helper, PN 21395 Donut Strike Plate must be purchased separately. If driving with one person, PN 21212 Horseshoe Strike Plate is a better option.
Unit Drives
Fence Posts
Sign Posts
Guard Rails
Median Dividers
Tent Stakes
T-Posts
Pipe Fence
Railroad Ties
Post Dimensions: T-post to RR Tie
Impact Force: 82,000 lbs.
Length of Stroke: 40
Hammer Weight: 300
Strokes per Minute: 35
Model SM40 w/ Tilt Model SM40 w/ Tilt and Grapple
Overall Length 45.5"
Overall Width 25.5"
Overall Height 64"
Tilt (side-side) 20°
Machine Weight 1,005 lbs (1,205 lbs w/ additional weight) 1,045 lbs (1,245 lbs w/ additional weight)
Hammer Weight 300 LBS (500 LBS MAX)
Length of Stroke 40"
Max. Strokes per Minute 35
Hydraulic Requirements 1500-3000 PSI
*12-30 GPM
Maximum Post Width 8.5" x 9.25"
Impact Force 82,000 lbs @ 500 lb weight
Impact Energy 1,025 ft-lbs @300 lb weight;
1,709 ft-lbs @ 500 lb weight
*Hammer will still operate on machines with less than 12 GPM with fewer strokes per minute.
Model DA21003L with grapple option also available $828.00.
Unit Includes
96" Hoses With FF Couplers
Grapple
Tilt
Factory Installed Additional Weight Kit
Danuser Hammer
Model SM40 has a 40” drop hammer design with up to 35 strokes per minute. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. Tilt option allows up to 20° in each direction. The hammer weight is 300 lbs. from the factory. Additional weight can be added for a total of 500 lbs. The unit also has an integrated post puller to be used with log chain.
NOTE: If post/pipe diameter is 5" or smaller and you have a helper, PN 21395 Donut Strike Plate must be purchased separately. If driving with one person, PN 21212 Horseshoe Strike Plate is a better option.
Unit Drives
Fence Posts
Sign Posts
Guard Rails
Median Dividers
Tent Stakes
T-Posts
Pipe Fence
Railroad Ties
Post Dimensions: T-post to RR Tie
Impact Force: 82,000 lbs.
Length of Stroke: 40
Hammer Weight: 300
Strokes per Minute: 35
Model SM40 w/ Tilt Model SM40 w/ Tilt and Grapple
Overall Length 45.5"
Overall Width 25.5"
Overall Height 64"
Tilt (side-side) 20°
Machine Weight 1,005 lbs (1,205 lbs w/ additional weight) 1,045 lbs (1,245 lbs w/ additional weight)
Hammer Weight 300 LBS (500 LBS MAX)
Length of Stroke 40"
Max. Strokes per Minute 35
Hydraulic Requirements 1500-3000 PSI
*12-30 GPM
Maximum Post Width 8.5" x 9.25"
Impact Force 82,000 lbs @ 500 lb weight
Impact Energy 1,025 ft-lbs @300 lb weight;
1,709 ft-lbs @ 500 lb weight
*Hammer will still operate on machines with less than 12 GPM with fewer strokes per minute.
Model DA21003L with grapple option also available $828.00.
- $10,145.00
- Alma, Kansas
- New
- 2024
- Danuser®
- DA21002L
- Available